Weblink: http://www.draeger.com Specification Attachment: 9046204_PSS_7000_en_bodygard.pdf Teaser: centre piece for a complete personal safety system for the fire fighter. Developed by professionals for professionals the new Dräger PSS® 7000 breathing apparatus – with Dräger Bodyguard® 7000 electronic monitoring unit – represents a major leep forward in the evolution of breathing apparatus for the professional fire fighter. The Dräger PSS 7000® is the platform and centre piece for a complete personal safety system for the fire fighter. Features include : Modular electronic monitoring system featuring the new Dräger Bodyguard® 7000, and options such as the Dräger FPS® Heads-Up Display and Dräger PSS® 7000 Merlin modem for telemetry operation New high wear resistant comfort shoulder and waistbelt padding with antislip surface for good grip Sliding and pivoting waistbelt assembly Breathing hoses integrated into the backplate prevent snagging and offer good hose protection Dräger Bodyguard® 7000 The Dräger Bodyguard® 7000 is an electronic signal and warning unit which provides continuous monitoring of personal information and operational status of the Dräger PSS® 7000 the self contained breathing apparatus. The revolutionary ergonomic design of the Dräger Bodyguard® 7000 incorporates the pressure sensor and power supply modules into the backplate of the Dräger PSS® 7000 which results in a balanced distribution of weight and a compact lightweight electronic monitoring unit.

Weblink: http://www.cranfordcontrols.com/ Specification Attachment: Teaser: VIPER Spatial Sounder 110/230 volt AC Multitone The Viper spatial 32-Tone 110-230v ac sounder is designed to give a high output for applications requiring a mains operated sounder and where a non standard tone may be required. It includes a wide range of sound patterns and frequencies compatible with International requirements. Each device is synchronised via its high frequency oscillator circuit, and gives sound outputs with frequencies of between 440 to 2850Hz. (dependent upon tone selected). Tones are selected via the DIL switch fitted to the PCB. By using three wires, a second stage alarm may be switched so that the continuous tone will override the tone selected. The sounder case material is ABS and is supplied as standard in red. A white version is also available.Each sounder is supplied complete with its own mounting base, which contains marker points for drilling two M20 gland entries. The installation of the VPR-MT32-230 sounder is not recommended in chilled areas These units do not require an earth connection as each device has its own transformer and de-coupling between mains frequencies. Part No. VPR-MT32-230 Output @ 1 metre 24v dc: 107 dBa Current @ 230v ac: c. 12 mA Voltage Range: 230v ac /110v ac +/- 10% Operating Frequency: 440-2850Hz Number of Tones: 32 Volume Control: -30 dBa IP Rating: IP65 Temperature Range: -20 to +70 °C Weight (per unit packed): 295g (Sounders are available in red or white by adding -R (red) or -W (white) to the end of the part number)

Weblink: http://www.cranfordcontrols.com/ Specification Attachment: Teaser: new Vantage beacon is big on light output but small on power requirements. Using the latest developments in surface mount LED technology, the new Vantage beacon is big on light output but small on power requirements. Part No.  VXB-1-SB-RB*/RL Configuration:  Standard  Low   Light Output (equivalent) @ 24v dc: 0.7 Watt  0.4 watt   Current @ 24v dc: 5 mA  3 mA   Voltage Range: 20-35v dc Operation Frequency: 1Hz IP Rating: IP43 Temperature Range: -20 to +70 °C Weight (per unit packed): 145g (Available in either red or white body colour with a choice of red, amber lens)   Part No.  VXB-1-DB-RB*/RL Configuration:  Standard  Low   Light Output (equivalent) @ 24v dc: 0.7 Watt  0.4 watt   Current @ 24v dc: 5 mA  3 mA   Voltage Range: 20-35v dc Operation Frequency: 1Hz IP Rating: IP65 Temperature Range: -20 to +70 °C Weight (per unit packed): 165g (Available in either red or white body colour with a choice of red, amber lens)

Weblink: http://www.fulleon.co.uk/ Key features: IP Rating IP42 Configuration 470 series (NO) Voltage Rating 24V systems Callpoint type Conventional Resettable Element Option available Approvals N/A Specification Attachment: Teaser: CX Manual Call Points have been engineered to fully comply with EN54-11 The CX Manual Call Points have been engineered to fully comply with EN54-11. This extremely versatile range has a comprehensive number of fixing accessories to assure compatibility with virtually all wiring and installation practices, both conventional and addressable. Approved by LPCB to EN54-11.  

Weblink: http://www.hbl.co.uk/ Specification Attachment: Teaser: easily installed with robust terminations Not only does the Banshee contain all of the features of a market leading sounder that one has come to expect from the acoustic excellence of Hosiden Besson Ltd, but it has been developed with both eyes firmly on the expectations of the user, the architect and the installer. The Banshee Multi-Tone Sounder is easily installed with robust terminations with push and twist bayonet fitting the Banshee has also been designed with aesthetics in mind. Radical looks and eye-catching design mean that the Banshee is pleasing to the eye as well as acoustically competent.  

Weblink: http://www.fireblast.com/ Key features: It also benefits from the following features; • Generates powerful, high-heat flames with controlled height of 0.20 m to 3 m, without polluting waste. • Flame detector connected to the gas supply • Lighting of central well only or lighting of whole fire container (automatic mode or manual mode) • Lighting and extinguishing of fire by wireless control held by the instructor. • Safety system with emergency stop button on control panel to cut off the gas supply instantly. • Easy and immediate relighting, even after several exercises. • Easy maintenance Specification Attachment: Teaser: designed for training in the handling of various types of extinguishing equipment The Vulcanos from Groupe Leader is designed for training in the handling of various types of extinguishing equipment (all extinguishers, hoses, portable foam units, etc. ).

Specification Attachment: Teaser: 5-story fire training tower The WHP Fourth Alarm-Five Story consists of a 5-story fire training tower, a 2-story residential/industrial unit and a 1-story annex. Features include 15 single windows, 1 double window, 5 single doors, 1 double door and a temperature monitoring system. The TOWER has an interior 5-story stair, a ladder from the 5th floor to a roof hatch, a parapet roof system and 4 rappelling anchors. The RESIDENTIAL/INDUSTRIAL section includes a 4′-0" attic space, a gabled roof structure with perimeter welded guardrails and 2 chop-outs and a 2nd floor live fire burn room.The ANNEX houses a second live fire burn room

Weblink: http://www.fireblast.com/ Key features: * Portable * Four working platforms * Variety of structure openings * Various types of door and window assemblies Steel curtain door Rolling slat door Security screen door Glass store front door Scissor gate Steel inward swinging door Window security gates * Recycling points * Replaceable insert tracking Specifications: Capabilities: * Forced entry training * Hand tool training * Repeatable training without damaging structure * Quick set up of each scenario Specification Attachment: The Forcible Entry Trainer provides agencies with a full range of forcible entry props in a mobile training platform. The benefits include the ability for fire and police to share the unit reducing training costs and travel of the students. The trainer can be set up in minutes in the parking lot. All props have replaceable cut and break parts that are acquired locally.    

Weblink: http://www.fireblast.com/index.php/portable/flagtrainer Key features: FLAG Trainer The FLAG Trainer provides an assortment of training modules that represents a variety of flammable liquid and gas incidents commonly found in first responder response. FLAG Trainer Equipment •Dot compliant transporter •Dual LPG Cylinders •Operator control module •Flammable liquid spill fire •OS&Y line breech fire •Gas meter fire •LPG pressure relief & ground fire •Boil over fire FLAG II Advanced The FLAG II Advanced offers a variety of training modules providing techniques for larger incident management, with the integration of automated controlled fire spread. FLAG II Advanced Equipment •Dot compliant enclosed transporter •Dual LPG Cylinders •Multi burner operator control station •Programmable logic controller •Burner management •Ignition modules •Running flammable liquid spill fire •Split flange fire •Gas meter fire •Christmas tree fire •LPG pressure vessel fire Specification Attachment: Teaser: consistent realistic training scenarios of the FLAG and FLAG II Advanced Trainers Hazardous material response to flammable liquid and gas incidents demand quick and effective response which is generated from specialized training. Specialized training in hazardous material response effectiveness can be achieved by the consistent realistic training scenarios of the FLAG and FLAG II Advanced Trainers. With a broad range of training scenario capabilities, each model includes innovative and advanced training solutions.

Weblink: http://www.trainingtowers.com/ Specification Attachment: Teaser: Fifth Alarm-Four Story consists of a 4-story fire training tower The WHP Fifth Alarm-Four Story consists of a 4-story fire training tower, a 2-story residential/industrial unit and a 1-story annex. Features include 14 single windows, 1 double window, 5 single doors, 1 double door and a temperature monitoring system. The TOWER has an interior 4-story stair, a ladder from the 4th floor to a roof hatch, a parapet roof system and 4 rappelling anchors. The RESIDENTIAL/INDUSTRIAL section includes a 4′-0" attic space, a gabled roof structure with perimeter welded guardrails and 2 chop-outs and a 2nd floor live fire burn room.The ANNEX houses a second live fire burn room.