Model number: Vision 3 Make: Scott Health & Safety Ltd. Weblink: http://www.scotthealthsafety.com Specification Attachment: Teaser: Available in 4 sizes with a range of headharness and port options The Scott Vision 3 offers unparalleled levels of comfort and vision to the wearer. Available in 4 sizes with a range of headharness and port options, the Vision 3 range can be used with any of Scotts breathing apparatus sets. Key Features * Injection moulded liquid silicone outer seal provides a great fit and comfort * Rubber and net headharness options available * 4 sizes available to fit the widest range of face sizes * Torodial visor provides excellent vision * Can be used with Scotts communication range Standards * CE marked in accordance with EN136  

Model number: ECO1003 Make: System Sensor Europe. Weblink: http://www.systemsensoreurope.com Specification Attachment: Teaser: Photoelectric smoke / Thermal detector By combining advanced technology often found in top of the range analogue detectors with the ease of use and cost effectiveness of a conventional unit, System Sensor brings the ECO1000. The range boasts many features previously only found in the more sophisticated – and therefore expensive — analogue addressable models. System Sensor is the first manufacturer to include such features in a conventional detector, improving the levels of protection and reducing false alarm rates in the smaller and less complex systems where the complexity of an analogue addressable system is not required. The ECO1003 photoelectric smoke detector belongs to System Sensor’s ECO1000 range of detectors. ECO1000 is a range of conventional detectors, which have been produced using the latest in manufacturing technology and supplied with an array of advanced features, making them ‘better by design’. The ECO1003 photoelectric smoke detector uses a state of the art optical chamber combined with an application specific integrated circuit (ASIC) to provide quick and accurate detection of fires. A combination of the unique chamber design and other technically advanced features will significantly extend the service intervals before cleaning of the detector becomes necessary. A laser-based hand held Remote Test Unit can be used in conjunction with the range of ECO1000 detectors for alarm test purposes. The unit transmits a coded message, preventing spurious alarms being generated by other laser-based devices. With a range of several metres, the hand held test unit provides a fast and simple way of remotely alarm testing the range of ECO1000 detectors and removes the need for any direct physical access to the detector by the user. The ECO1003 detector has an integral LED, which illuminates to provide a local alarm signal. This latches on, and remains illuminated until the detector is reset by a momentary power interruption. An optional remote LED annunciator may be used to repeat any alarm signal. A variety of detector bases can be used with the ECO1003 detector, providing application flexibility and compatibility with a wide range of Fire Alarm Control Panels. All bases are fitted with a shorting spring to permit circuit testing prior to fitting the detector and have a tamper resistant feature, which when activated prevents removal of the detector without the use of a tool. All System Sensor products are covered by our extended 3-year warranty.  

Model number: 6500 Series Beam Detectors Make: System Sensor Europe. Weblink: http://www.systemsensoreurope.com Specification Attachment: The 6500S and 6500 are addressable reflector-type linear optical beam smoke detectors, designed to operate as a component of an intelligent fire alarm system. They operate primarily on the principle of light obscuration utilising an infra-red beam. Optical beam smoke detectors are particularly appropriate for protecting buildings with large open spaces such as warehouses, atriums, etc. Alignment of the detector is simplified with the aid of the detector’s "gunsight" targeting device. Alignment of the detector with the reflector can then be “fine tuned” with the aid of a numerical signal strength indicator. The sensitivity of the detector can be set to between 25% and 50% obscuration, providing application flexibility to suit the environment in which the detector will be installed. In addition to the four fixed value alarm thresholds, there are two variable thresholds that automatically compensate for changes in the environment which could otherwise result in unwanted alarms while remaining within a known sensitivity range. The detector incorporates automatic drift compensation, whereby the detector will adjust its detection thresholds in line with any long term signal reduction of the beam caused by contamination of the optical surface. The detector can be adjusted up to 10° vertically and horizontally for alignment. Where greater angular adjustment is required, the multi-mount accessory enables the detector to move through 28° vertically and 360° horizontally when ceiling mounted, or up to 23° vertically and 90° horizontally when wall mounted. All System Sensor products are covered by our extended 3 year warranty.  

Make: Nittan Group Weblink: http://www.nittan.co.uk Specification Attachment: Teaser: conventional, two wire fire alarm control panel. The 2RA-P Dual IR Flame Detector is suitable for connection to a conventional, two wire fire alarm control panel. Traditional UV and IR flame detectors, in their singular form, are susceptible to false alarms. These false alarm sources differ for each type of flame detector, however, with the 2RA-P dual infrared flame detector both flame detector element’s must receive an alarm signal prior to initiating a fire alarm signal to the fire alarm control panel.  

Model number: 50′ Teleboom Make: E-ONE Weblink: http://www.e-one.com/products/main-line/aerial/50′-teleboom Specification Attachment: Teaser: 750-gallon tank and elevated master stream with centralized controls Business trends indicate that rural and suburban departments are requesting the 50’ Teleboom for one primary reason–efficiency. Rural departments appreciate the 750-gallon tank and elevated master stream with centralized controls for one-person operation. Suburban departments welcome the Teleboom because of its versatility. It can be equipped with a rescue-style body to maximize storage space for EMS calls, an unobstructed hosebed and still provide aerial duties all on single rear axle. Whether it’s your first aerial, or complimenting your existing fleet, you owe it to your department to check out the benefits the 50’ Teleboom offers.

Model number: TITAN HPR 8X8 Make: E-ONE Weblink: http://www.e-one.com/ Specification Attachment: Teaser: Offering the largest compartment capacity on the market The Titan HPR series is designed and manufactured for one purpose – to help you save lives. By combining years of experience with today’s cutting edge technology, E-ONE’s Independent Suspension ARFF units allow you to meet the challenges of the toughest terrain. Offering the largest compartment capacity on the market, E-ONE is leading the way when it comes to meeting your equipment storage requirements. It’s about listening to your needs, exceeding industry standards and offering features that save you time, space, and promote safety when seconds count. Features: Detroit Diesel Series 60 665 hp with a unique sliding engine cover 3,000-gallon water tank with a 400-gallon foam cell 2,000-gpm Hale Water pump Gator Grip walking surfaces Large unobstructed compartments with locking rollup doors Reinforced Extruded Aluminum Cab

Model number: CT009 Make: Kronenburg B.V Weblink: http://www.kronenburgfire.com Specification Attachment: Teaser: The new crash tender is built on a specially developed KME 6×6 chassis The CT009 is build as fully self-supporting construction made of glass-fibre reinforced polyester. The cabin supplies an optimal view thanks to the big glass surfaces. The tank can carry 12000 litres of water plus 1500 litres of foam, but other combinations are possible. Normally the engine cover is a one piece element, but for the CT009 we developed a two-piece cover on each side. This makes small checks as well as regular maintenance an easy job. The new crash tender is built on a specially developed KME 6×6 chassis which results in a high manoeuvrability on the road as well as off-road. The crash-truck has a lower centre of gravity and thereby an even more steady road ability. Besides the 6×6 crash tender a 4×4 configuration is already available, while an 8×8 is in development.  

Model number: STRIKER 3000 Make: OSHKOSH CORPORATION Weblink: http://www.oshkoshairport.com/en/ARFFTrucks/NewStriker/Striker3000.aspx Specification Attachment: Striker_3000_InfoSheet_4-2010.pdf Teaser: New Striker 3000 Wrapped in a sleek and aero fiberglass body, the new Striker is offered with a wide range of industry leading innovations. Airport fire chiefs and firefighters from around the globe assisted in developing this technically advanced ARFF vehicle. The NEW Striker delivers: Innovative Fire Suppression Unmatched Chassis Performance Advanced Safety Systems Unsurpassed Reliability and Durability Smart Design The new Striker is built to confront airport emergencies. We know lives depend on it.

Model number: AUTROSAFE 4 Make: AUTRONICA FIRE AND SECURITY AS Weblink: http://www.autronicafire.com Specification Attachment: AutroSafe4ProductBrochure.pdf Teaser: A new level in interactive fire detection systems AutroSafe 4 is managed through a single point of operation for download of configuration data or program upgrades. This ensures a faster and safer way to change or upgrade the system program, using the panel network, AutroNet or a USB memory stick. Minimum downtime, through quick and easy commissioning