Model number: Qmax Single Stage Pump Make: Hale Weblink: http://www.haleproducts.com/Main/Products,1,1.aspx Specification Attachment: Teaser: he most popular single stage pump in North America.  The most popular single stage pump in North America. Designed specifically to increase the efficiency of water flow with large diameter hose. Oversized discharge passages and additional 4” outlet ports are designed to facilitate firefighting methods using large diameter hose. NFPA ratings up to 2250 GPM. Maximum flows over 2600 US GPM from a sufficicent positive pressure water source and an appropriate engine. Extraordinary reliability and high performance you can count on. Designed specifically to increase the efficiency of water flow with large diameter hose. NFPA 1901 – 1000, 1250, 1500, 2000 or 2250 GPM ratings Idea for applications such as: Pumpers Tankers Aerials Rescue Pumper Pumper Tanker 

Model number: HERO Make: HIAX Weblink: http://www.haix.com/ Key features: Upper Material: Waterproof leather, hydrophobic, breathable (5,0 mg/cm²/h), 2.0 – 2.2 mm thick Cut Protection: KEVLAR® protection against cuts certified with cut category 2 (24 m/sec.) Inner lining: CROSSTECH® Laminat Technology Non-woven insole: Non-woven insole absorbs sweat and moisture Foot bed: Anatomically formed, exchangeable, washable, very good moisture absorption, dries quickly, Vario width fit system Protective Toe Cap: Anatomically formed and well-padded protective toe cap Protective Throughsole: Flexible protective throughsole Sohle: Extremely slip resistant profiled rubber sole. Optimal performance in water, ice, and snow. Fullfills the highest demands of the European Standards EN 15090 + SRC HAIX®-Climate System: Climate System with Micro-Dry lining at the top of the boot leg HAIX®-MSL Specification Attachment: 507001_fire_hero.pdf Teaser: Fire Fighting Boot System: MicroSoftLight: Improved damping, extremely low weight due to the PU foam across the entire sole area, good cold/heat insulation The new FIRE HERO is a revolutionary new firefighter boot. With more than nine cutting-edge innovations, HAIX demonstrates where the industry is headed. Step in, zip up, fasten the closure system in one motion and you are ready to fight the fire. A brand-new, patented lace-zipper system ensures the boot can be fitted perfectly and securely in mere seconds.  

Make: Task Force Tips Weblink: http://www.tft.com/productsearch/product_details.cfm?product=B-DC1040BC Specification Attachment: Teaser: DUAL AGENT NOZZLE 1.0″ NH (25mm) INLETS  DUAL AGENT NOZZLE 1.0" NH (25mm) INLETS The nozzle for use with water or AFFF is identical to the DS1040BC (page 10) TFT BubbleCup nozzle with the exception of the pipe thread inlet.

Model number: C1024 Make: Task Force Tips Weblink: http://www.tft.com/productsearch/product_details.cfm?product=C1024&directoryName=Handheld Nozzles Specification Attachment: Teaser: TWISTER TIP 3/4″ GHT (19mm) TWISTER TIP 3/4" GHT (19mm) Dual gallonage nozzle with two flow settings of 10 and 24 gpm @ 100 psi (37 and 90 l/min @ 7 bar). All lightweight materials, hardcoat anodized aluminum. This tip only design has a twist "off" position for break-and-extend operations. 3/4" GHT (19mm) rigid thread is standard.

Make: Holmatro Weblink: http://www.holmatro.com/ Specification Attachment: Teaser: the strongest from Holmatro so far, combines a wide blade opening (202 mm) and deeper reach with a significant cutting force of 1018 kN / 103.8 t. Over the past few years the A-, B- and C-pillars in modern cars have become substantially wider, deeper and thus stronger. These developments have obviously been made to increase occupant safety. However, at the same time they have created a more difficult barrier for rescuers during victim extrication efforts after a collision. To surround and cut these expanding and increasingly complex vehicle constructions Holmatro has developed a brand new cutter: the CU 4055 C NCT™ II. This cutter, the strongest from Holmatro so far, combines a wide blade opening (202 mm) and deeper reach with a significant cutting force of 1018 kN / 103.8 t. New Car Technology The CU 4055 C NCT™ II belongs to Holmatro’s second generation of New Car Technology cutters. Its characteristic U-shaped blades are specifically designed to cut the advanced constructions and hard materials found in modern vehicles. Moreover, they do this with far more efficiency and at a much lower working pressure than possible with regular ‘General Purpose’ type blades. Holmatro’s NCT™ blades pull the material into the cutting recess, where the cutting force is at its maximum. This results in a more controlled and smoother cut. 4000-series Being part of Holmatro’s 4000-series this new cutter is equipped with many innovative features such as i-Bolt Technology (flat central bolt construction for better access, and superior cutting performance), single hose CORE™ Technology and LED lighting in the carrying handle  

Make: Holmatro Weblink: http://www.holmatro.com/ Key features: High pressure pneumatic lifting bag. Dimensions: 908×908 mm. Working pressure: 8 bar. Max. inflation height: 520 mm. Max. effective lifting force: 670 / 68 kN / t. Specification Attachment: Teaser: High Pressure * made of aramid reinforced nitril rubber NBR – no corrosion – durable * reinforced with 3 aramide inlays – lightweight – highly flexible – proven durability * revolutionary non-slip design – maximum grip on all surfaces – interlocking when 2 bags are placed on top of each other * unique lower profile edges – easy insertion under all circumstances * "Autolock" couplers – quick connection with automatic double locking system * interchangeable with existing systems * air hoses with push-lock connection – quick assembly without hose clip * CE-icons – optimal safety for the user * centring cross on both sides – easy and safe positioning * resistant to ozon and a wide range of chemicals (more details on request)

Weblink: http://www.bullard.com/ Specification Attachment: Teaser: Simple, one-button operation. Designed with interior fire operations in mind. Simple, one-button operation. Designed with interior fire operations in mind. Has a 3.5-inch LCD, enabling clear viewing in smoky conditions. Super Red Hot feature identifies heat levels by colour. Advanced Relative Heat Indicator provides temperature measurement. Weight (with battery): 2.7 lbs / 1.2 kg. Dimensions: 4 3/4" x 4" x 7" / 120 x 101 x 178 mm. Heat Test: 500°F / 260°C for 8 minutes; 300°F / 150°C for 16 minutes. Water resistance: IP67.